Fiberglass Self-adhesive Drywall Joint Tape

Product Description:

Self-adhesive fiberglass mesh tape(also called drywall joint tape) is made of fiberglass mesh that is coated with adhesive latex.

It's the most ideal material for cracks repairing on the drywall,and joints strengthening on the ceilings,gypsum boards,ect.

Comparing to the paper tape which is widely used on the market,its much easier to use, no bubbles or blisters,and can be applied directly to the wall surface without pre-embeding required. 

Its tensile strength is up to 600N/50mm which is much stronger than paper tape. Furthermore, it's mom-organic,mold-resistant,long dyrability,which prevents the possible break that happens to paper after 3-5years.

How to use it?

1. Wall must be clean and dry.

2. Center and apply tape over the length of the joint and pressing firmly.

3. Apply a generous first coat of compound over the tape and through the mesh, making sure to completely fill the joint crevice. When the joint has been completely filled, wipe off any excess compound with the drywall knife leaving enough fill the joint crevice. Let dry completely, then sand slightly.

4. Apply sufficient thin finishing coats to produce a smooth wall surface.

5. No tapered edge on the cut of butted .

Therefore, special care must be taken to assure proper compound that will require an increased amount of edge.

Technical Specification:

Others available as per clients' request . 

Main Specification :

1) Mesh size: 8x8 mesh/inch ,9 x 9 mesh/inch

2) Width: 50mm, 100mm, 150mm, 200mm or  as per customers' requirement

3) Length of roll: 20m,45m,90m  , etc.

4) Colors: white (standard ),yellow,blue,green  , ect.

5) Main size: 50mm x 90m, 50mm x 45m, 50mm x 20m or  as per customers' requirement.

Factory Production Facility :

Packing & Shipment  :